Loading Bay Canopies

                           Advanced Pest Control

Preparation

Pigeon netting installations for most loading bays consist of special fixings for the steel work beams. Bridge clamps can be used for the main anchor points to harness the stainless steel or galvanized steel wire rope.

When all the anchor eyebolts have been installed the intermediate girder clips can be fixed in place approximately every 600mm to support the steel wire rope. After all the fixings have been installed throughout the steel beam sections the wire can now be connected to the fixings and tightened to the required tension using M6 barrel strainers. All fixings are available ether in stainless steel of galvanised depending on the client’s specifications

Pigeon Netting Installation For Loading Bays

The pigeon netting is now ready for installation using O-ring staples called hog ring, these will connect the pigeon netting to the tensioned steel wire rope every 50mm throughout the steel beam structure until the netting is totally suspended on the wire rope system. Special access zips or stainless steel clips can be installed so maintenance can be carried out inside the closed of area.